Well, ive found a down pipe which may work just getting some info on a maybe on that, but yeah......

ordered the fuel pump, map bypass, all the bolts, gaskets.

needed
12:1 fmu anyone selling? ^_^
turbo oil lines
oil cooler and relocation kit
we will see.......

sounds like your getting close. there is a obx fmu on ebay thats like 80 bucks.

haha, take lots of pictures of the install for us! You'll have a turbo accord sooner than you think. And OBX rocks by the way. I installed thier fuel rail and I noticed a good difference (well for a fuel rail). I'm going to get that OBX LSD as soon as I need a new clutch.

im looking forward to the install, but it will probably be held off for over a month.....

yeah, seeing as you will have the tranny off you might as well put a LSD in. You should take pictures of the whole process of removing the transmission, flywheel and what not, add that to the diy list for everyone.

As for OBX i cant claim either way, havent used any of their products and the only thing ive seen is an obx muffler on a 200sx.

When im taking pictures Ill be sure to not have too many of me going..... oh man..... i screwed this up sooo bad.... lol

when I have the trans off, I'll definetly take some pictures of the whole thing. That would be a lot of help to people I'm sure. Plus pictures of splitting the transmission open (for the lsd). Fun stuff!

Well countdown the days to your turbo install marbro, it's coming down to it!

Just need the downpipe now probably buy that next week

bougth a blox 12:1 fmu decided im really not going to find a below 100 with shipping deal

bought the turbo feed and drain lines

and bought the oil cooler and relocation kit the one on ebay, when you do the math it works out to be a lot cheaper and the block plate and oil filter plates for the full kit there are niiice so i figure you couldnt get those by themselves any cheaper then 120 bucks

Some times being persistent in looking for those parts pays off...sometimes..
Good for you MarBro..

WheelBrokerAng [sm=americanasmiley.gif]

Finding most the parts arent that hard seeing as i found the drag manifold and downpipe it make things a lot easier