General Tech Help Good at troubleshooting? Have a non specific issue? Discuss general tech topics here.

94 accord won't rev past 2k

Thread Tools
 
Search this Thread
 
  #21  
Old 09-23-2012, 01:07 PM
poorman212's Avatar
Super Moderator
Join Date: May 2010
Location: Youngsville, NC
Posts: 11,833
Default

Are you sure that is an "8" and not a "6".

Also see this link for getting the codes....https://www.hondaaccordforum.com/for...threads-40780/

If the CEL is on, then the car will go into "limp" mode and will do just what you are describing. Need to get the code and resolve the issue.

EDIT: Here is the link to the VIN Decoder I was talking about : https://www.hondaaccordforum.com/for...r-members-use/
 

Last edited by poorman212; 09-23-2012 at 01:10 PM.
  #22  
Old 09-23-2012, 04:34 PM
Slidesquad240's Avatar
Junior Member
Thread Starter
Join Date: Sep 2012
Posts: 52
Default

I swapped out the tps sensor with another one and it seems to run a lot better now
 
  #23  
Old 09-24-2012, 08:29 PM
poorman212's Avatar
Super Moderator
Join Date: May 2010
Location: Youngsville, NC
Posts: 11,833
Default

Get the codes...please?
 
  #24  
Old 09-24-2012, 11:55 PM
AccorDats's Avatar
Member
Join Date: Aug 2012
Location: antioch,ca
Posts: 105
Thumbs up

Originally Posted by poorman212
Get the codes...please?
OT:

I salute you sir for genuinely helping us out in this forum.
 
  #25  
Old 09-25-2012, 09:01 AM
Slidesquad240's Avatar
Junior Member
Thread Starter
Join Date: Sep 2012
Posts: 52
Default

Not sure how all I seen was to put a paper clip in the blue plug there's 2 blue plugs next to each other ?
 
  #26  
Old 09-25-2012, 06:29 PM
poorman212's Avatar
Super Moderator
Join Date: May 2010
Location: Youngsville, NC
Posts: 11,833
Default

It should be the one with two wires.
 
  #27  
Old 09-25-2012, 06:31 PM
PAhonda's Avatar
Super Moderator
Join Date: Sep 2006
Location: Houston, TX
Posts: 15,922
Default

You want to short the plug with only two wires going to it (the other one has 3).
 
  #28  
Old 09-25-2012, 08:06 PM
Slidesquad240's Avatar
Junior Member
Thread Starter
Join Date: Sep 2012
Posts: 52
Default

Ok I'll do That sometime tomorrow and get back to you
 
  #29  
Old 09-28-2012, 04:42 PM
Slidesquad240's Avatar
Junior Member
Thread Starter
Join Date: Sep 2012
Posts: 52
Default

Well great news I registered the car and did a few test drives only to see it puffing white smoke and the oil turned out milky so I'm guessing it blew a head gasket
 
  #30  
Old 09-29-2012, 09:29 AM
poorman212's Avatar
Super Moderator
Join Date: May 2010
Location: Youngsville, NC
Posts: 11,833
Default

Ouch.....a compression and leak down should confirm. Of course if it is bad enough, pull the rad cap off when cold, start engine and look for bubbles in the coolant.
 
Related Topics
Thread
Thread Starter
Forum
Replies
Last Post
Cody_754
General Tech Help
116
03-08-2024 10:34 AM
M-train
General Tech Help
6
02-27-2015 06:55 PM
BrandoSATX
General Tech Help
9
07-03-2013 12:11 PM
argarcia86
General Tech Help
7
03-17-2013 08:28 PM
blakeryanfarris
General Tech Help
5
12-06-2012 12:13 PM



Quick Reply: 94 accord won't rev past 2k



All times are GMT -5. The time now is 12:01 PM.