ABS Light on, Replaced sensor still on?
#11
Without the actual code this is going to be very hard to figure out? As there are other things (inlet/outlet solenoids) that could be related to a "left front".
There is a way to jump the DLC and read the code by counting the "flashes" from the ABS light.
There is a way to jump the DLC and read the code by counting the "flashes" from the ABS light.
#14
AT YOUR OWN RISK....do I need to repeat....YOUR RISK. Pins four and nine on the DLC, jump those with a paperclip and then turn the key to on/pos II.
Count the flashes from the ABS light.....and any others that might flash. Then let us know what code you get from which system (ABS, SRS, CEL, D4 is auto).
Count the flashes from the ABS light.....and any others that might flash. Then let us know what code you get from which system (ABS, SRS, CEL, D4 is auto).
#16
Do yourself a favor - get the car in the air, be safe. Pull the wheel and then put the car into "N" - can't/don't remember if this is an auto or manual but you get the idea. Turn the hub by hand....thus turning the cv shaft....and watch the gap between the tone ring and sensor......just wondering if the ring on the shaft..or the shaft...might be "out" causing the ring to at some point come into contact with the sensor? Strange that two new replacments (one OE, one aftermarket would be bad "out of the box" or fail within a month?).
#18
Ring?
#20
Honda Accord Automatic Transmission 2011 has below problems
1. D light blinking and now Ghear liver is not moving
2. Car Engine is starting
3. I connect computer below steering and it shows connecting and failed.
Anyone who can help me to diagnose the issue
1. D light blinking and now Ghear liver is not moving
2. Car Engine is starting
3. I connect computer below steering and it shows connecting and failed.
Anyone who can help me to diagnose the issue