HELP: '01 V6 Cooling Fan only Comes on with AC
#12
@ PAhonda I agree with you about installing an OEM thermostat which I will do once I figure out what's going on. The one that is in the car is working though.
The cooling fan came on after bleeding the system but the gauge was reading right under 'H'. It cycled twice at the same point and cooled the car down to 3/4 (half way between the middle and H. Do you think the gauge or sending unit is bad?
The cooling fan came on after bleeding the system but the gauge was reading right under 'H'. It cycled twice at the same point and cooled the car down to 3/4 (half way between the middle and H. Do you think the gauge or sending unit is bad?
#13
Your car has no sending unit. The engine coolant temperature sensor sends a signal to the engine computer. The engine computer uses that signal for the open/closed loop. The computer also sends a signal to the gauge. If something was wrong with the ECT, then I'd suspect you would get a check engine light.
My guess is that the new aftermarket thermostat is your issue. That is why I suggested an OEM Honda thermostat.
My guess is that the new aftermarket thermostat is your issue. That is why I suggested an OEM Honda thermostat.
Thread
Thread Starter
Forum
Replies
Last Post
MichaelKline
General Tech Help
4
04-29-2012 12:52 PM
Rice
General Tech Help
5
04-27-2012 08:38 AM
CDJDM07
General Tech Help
5
08-24-2011 09:51 AM