General Tech Help Good at troubleshooting? Have a non specific issue? Discuss general tech topics here.

help found tear in intake hose!

Thread Tools
 
Search this Thread
 
  #1  
Old 10-15-2012 | 07:17 PM
Argon's Avatar
Thread Starter
Joined: Oct 2012
Posts: 4
Default help found tear in intake hose!

I have 2000 honda accord 4dr lx. I bought the car in 218000 on the chasis and about 90k on a swapped motor. I've put about 300 miles on it so far and just noticed this tear in the intake hose where it connects to the engine. The car drive alright but fuel econ is not the greatest. Can I duct tape it in the mean time? Heelp please!
http://db.tt/MBiac6sH
 

Last edited by Argon; 10-15-2012 at 07:20 PM.
  #2  
Old 10-15-2012 | 08:24 PM
moey's Avatar
Member
Joined: May 2011
Posts: 197
Default

You might be able to find a piece of rubber with hose clamps and attach it somehow. Id be hesitant to use duct tape in case it somehow got sucked in. I think I would leave it until I was able to procure a new part in the next couple days. I'm surprised it does not idle rough.
 
  #3  
Old 10-15-2012 | 10:04 PM
Dr. Drivability's Avatar
Super Moderator
Joined: Aug 2011
Posts: 1,149
Default

i think he might be talking about the large hose to the throttle body...ya, you can "duct" it, but a new or used one will need to put on eventually.
 
  #4  
Old 10-16-2012 | 05:31 AM
shipo's Avatar
Super Moderator
Joined: Aug 2012
Posts: 3,054
From: Southern New Hampshire
Default

Agreed, duct tape will work if done well, however, I'd just visit a bone yard and buy one from another car.
 
Related Topics
Thread
Thread Starter
Forum
Replies
Last Post
ChipsXJ
General Tech Help
1
06-13-2011 02:14 PM
Tek310
General Tech Help
4
05-28-2011 10:25 AM
xtremaggose
General Tech Help
2
09-03-2009 10:57 AM
2001accord
Appearance
2
07-08-2007 06:41 PM




All times are GMT -5. The time now is 12:45 AM.