Just bought a '94 Accord EX
#231
05-14-2013 | 06:36 PM
Almost A Senior Member
Joined: May 2012
Posts: 267
From: Acworth, GA
Not sure its exactly the same but if it helps my 96 has the hitachi dist which has the internal coil aka 4 wires on the cap so i have to assume 5 on the cap is the tec.
Also if you have a Hitachi the seals are not to hard to get your hands on, find my thread on leaking distributor and there is a web site that you can order them from. changed mine about a month ago.
Also if you have a Hitachi the seals are not to hard to get your hands on, find my thread on leaking distributor and there is a web site that you can order them from. changed mine about a month ago.
Last edited by firefighter44; 05-14-2013 at 06:38 PM.
#232
05-14-2013 | 07:25 PM
Thread Starter
|
Member
Joined: Sep 2012
Posts: 140
From: Pennsylvania
Sorry for the "bloating". I will start a new thread. I see however though you have a '94 EX. Does yours have the Hitachi distributor? If so, maybe you know what seals I need and where to get them?
#233
05-14-2013 | 07:34 PM
Super Moderator : And A Texan
Joined: Feb 2007
Posts: 9,652
From: Katy, TX
Plenty available on ebay, etc.
accord distributor seals | eBay
Seal is tricky to seat properly w/ socket driver. Use plenty of lube and take your time. I did this on a 97 Acura 2.5 TL and 94 Accord EX and both instances the seal leaked afterwards. Not sure what I did wrong.
good luck
accord distributor seals | eBay
Seal is tricky to seat properly w/ socket driver. Use plenty of lube and take your time. I did this on a 97 Acura 2.5 TL and 94 Accord EX and both instances the seal leaked afterwards. Not sure what I did wrong.
good luck
Thread
Thread Starter
Forum
Replies
Last Post
