Long Crank/No Start When Hot? FUSE? RELAY?
#12
RE: Long Crank/No Start When Hot? FUSE? RELAY?
Buy Used OEM
http://cgi.ebay.com/ebaymotors/94-95...QQcmdZViewItem
Relay Location:
http://wiki.answers.com/Q/Where_is_t...onda_Accord_DX
I can't find the exact part number right now but I believe you can search by the one written on the front of the Used OEM one, or just pull yours, take it in with you....
http://cgi.ebay.com/ebaymotors/94-95...QQcmdZViewItem
Relay Location:
http://wiki.answers.com/Q/Where_is_t...onda_Accord_DX
I can't find the exact part number right now but I believe you can search by the one written on the front of the Used OEM one, or just pull yours, take it in with you....
#13
RE: Long Crank/No Start When Hot? FUSE? RELAY?
I called the dealer and got the part number.(39400-SV4-003)They want $56.25 for it which in my opinion is not half bad. On the other hand I found a brand new OEM replacementon Ebay for only $25 and $8shipping. I think im gonna go with the Ebay item. Thanks for all the help illupdate when i getthe partand get around to putting it in...
P.S. Thanks for the link sir_nasty...
http://cgi.ebay.com/ebaymotors/ws/eB...769&rd=1,1
P.S. Thanks for the link sir_nasty...
http://cgi.ebay.com/ebaymotors/ws/eB...769&rd=1,1
#14
RE: Long Crank/No Start When Hot? FUSE? RELAY?
I removed my main relay this spring and re-soldered it....it wasn't that bad of a job (1 hr maybe) and the cost was free. I wasn't having any problems but did before the summer heat anyway. The joints looked good but I redid them for peace of mind.
#15
RE: Long Crank/No Start When Hot? FUSE? RELAY?
- Just replaced the main relay today took only a few mins.She started fine but will getthe true test tommorrow when we have a high of 92![8D]
- I also disassembled the old relay and saw numerous signs of worn and cracked solder joints so im pretty convinced that this is the problem.
------Thanks for everyones help------
- I also disassembled the old relay and saw numerous signs of worn and cracked solder joints so im pretty convinced that this is the problem.
------Thanks for everyones help------
Thread
Thread Starter
Forum
Replies
Last Post
WheelBrokerAng
DIY Answers.
1
08-02-2013 08:41 PM
OKhonda94
General Tech Help
6
08-12-2012 12:43 AM
dimbee
General Tech Help
11
10-12-2007 02:52 PM