F/H parts
#1
F/H parts
Ok well I have a rear disk set up pulled off a 94 ex. I think they need new rotors or MIGHT be able to be turned. Most brake lines are still intact.
Missing
-The bolts that hold on the 2 ebrake lines to the rear calipers (6 total)
-The nuts that hold on the sway bar in place (2 total)
-The bolts that hold the calipers in place (4 total)
-Brake pads
Asking $150
CAN BE USED ON 90-97 ACCORDS!
I have 4 honda center caps.
Asking $20 for all four
H22a4 balancing shafts
Asking $35
H22 oil pan with oil catcher and griddle cover
asking $45
F22 oil pan with oil catcher and griddle cover
-Has a little rust as you can see. But that can be sanded down and repainted.
asking $30
F22 pistons
-It has rods still connected but they have a good bit of surface rust from sittin out in the barn. Also one of the rods has a spun rod bearing Pistons have NOTHING wrong with them. No rings
asking $25
F22 side engine covers with balancing shaft gear (not sure what they are called)
asking $10
H22 side engine covers with balancing shaft gear (not sure what they are called)
asking $15
Oil squirter bolts (3)
asking $5
F series trans cooler lines - inclued both bolts and lines
asking $8
F series trans dip stick
asking $5
AUTO starter - working when pulled
asking $35
Power steering pump - will inclued bracked if need /working when pulled
asking $30
AUTO trans TB cable - from TB to trans. NOT to be confused with cable from pedal to TB.
asking $10
Shift and TQ solenoids - working when pulled
asking $35 for both or $20 each
I also have a bunch of miscellaneous bolts from both of the blocks(H22/F22). Let me know what you need and I will see if I have them.
Shipping will be on the buyer (Unless you are doing a local pick up) also please add 3% for paypal. Thanx for looking!!
-Ryan
Missing
-The bolts that hold on the 2 ebrake lines to the rear calipers (6 total)
-The nuts that hold on the sway bar in place (2 total)
-The bolts that hold the calipers in place (4 total)
-Brake pads
Asking $150
CAN BE USED ON 90-97 ACCORDS!
I have 4 honda center caps.
Asking $20 for all four
H22a4 balancing shafts
Asking $35
H22 oil pan with oil catcher and griddle cover
asking $45
F22 oil pan with oil catcher and griddle cover
-Has a little rust as you can see. But that can be sanded down and repainted.
asking $30
F22 pistons
-It has rods still connected but they have a good bit of surface rust from sittin out in the barn. Also one of the rods has a spun rod bearing Pistons have NOTHING wrong with them. No rings
asking $25
F22 side engine covers with balancing shaft gear (not sure what they are called)
asking $10
H22 side engine covers with balancing shaft gear (not sure what they are called)
asking $15
Oil squirter bolts (3)
asking $5
F series trans cooler lines - inclued both bolts and lines
asking $8
F series trans dip stick
asking $5
AUTO starter - working when pulled
asking $35
Power steering pump - will inclued bracked if need /working when pulled
asking $30
AUTO trans TB cable - from TB to trans. NOT to be confused with cable from pedal to TB.
asking $10
Shift and TQ solenoids - working when pulled
asking $35 for both or $20 each
I also have a bunch of miscellaneous bolts from both of the blocks(H22/F22). Let me know what you need and I will see if I have them.
Shipping will be on the buyer (Unless you are doing a local pick up) also please add 3% for paypal. Thanx for looking!!
-Ryan
Last edited by g22cd5; 09-17-2010 at 05:54 PM.
#5
hey G. is the griddle cover that you have shown for both motors the one that supposedly adds a bit of power to the motor? like the f22a6 has it but the f22a1 doesnt or something like that. I hear the f22b1 is the same has some kind of catch in the oil pan that acts as a barrier and ads small amounts of power. jw if you know.
#6
I have no clue man...lol
The h22 one has a big square hole that the f22's don'e...maybe helps out add the oil up?..I really don't know. It could have something to do with the oil squirters maybe? Since the h22's have them and the f series don't? I’d ask PAhonda or Jimblake...if you find out let me know. I'm interested now..lol
The h22 one has a big square hole that the f22's don'e...maybe helps out add the oil up?..I really don't know. It could have something to do with the oil squirters maybe? Since the h22's have them and the f series don't? I’d ask PAhonda or Jimblake...if you find out let me know. I'm interested now..lol
Thread
Thread Starter
Forum
Replies
Last Post
fatboy1185
PRIVATE For Sale / Trade Classifieds
19
11-21-2010 01:47 AM
top end ms
PRIVATE For Sale / Trade Classifieds
9
02-14-2008 01:35 AM